Dry purification chemical for the BP-6 and BP-10
FuelPod Accessories
The most cost effective and reliable way to DRY WASH your biodiesel!
No More water washing with the Green Fuels America BP-6 and BP-12 Biodiesel Purification Systems! The air operated, pumped, biodiesel purification system comes with all fittings to attach to the FuelPod(tm) or FuelMeister(c) systems with ease and can be used with any biodiesel processor.
The BP-6 comes complete with a single 5lb. purification tower and 5lbs. Of Amberlite(tm) BD10-Dry(tm) Ion Exchange resin; enough to purify 500 to 750 gallons of biodiesel at a cost of 3-4 cents per gallon while the BP-12 comes complete with twin towers; enough to purify 1000 to 1500 gallons of biodiesel.
Simply wheel the system to your reactor or wash tank, swap the lid with the supplied dry was lid and attach an air line. Drain the glycerin from the fuel, turn on the system and walk away. A few hours later the fuel is crystal clear, purified and ready to use, it’s that easy.
The BP-6 and BP-12 Biodiesel Purification Systems are the easiest and most efficient way to dry wash and purify your biodiesel to the highest standards utilizing a process used in most high quality commercial biodiesel plants worldwide.
System Includes:
Enclosed, wheeled cabinet
5lb. Amberlite(tm) BD10-Dry(tm) tower (BP-6)
5lb. Amberlite(tm) BD10-Dry(tm) (BP-6)
2 – 5lb. Amberlite(tm) BD10-Dry(tm) towers (BP-12)
10lbs. Amberlite(tm) BD10-Dry(tm) (BP-12)
Air Pump
Air controls and regulator
Emergency Stop
Removable Drip Tray
Dry Wash Lid and Draw Tube
Hoses
Specifications:
BP-6 throughput: Dry Wash 40-80 gallons of biodiesel per day
BP-6 Shipping Weight: 45 lbs.
BP-12 throughput: Dry Wash 80-160 gallons of biodiesel per day
BP-12 Shipping Weight: 55 lbs.
FuelMeister Accessories
The Dryer Lid Allows FuelMeister II owners to completely dry a 40 Gallon batch of biodiesel in 1 hour. Each filter lasts about 4 batches. Lid comes with 2 filters.
NOTE: THE FUELMEISTER II EXPANSION TANK IS DESIGNED AS AN EXPANSION MODULE TO THE FUELMEISTER II PERSONAL BIODIESEL PROCESSOR SYSTEM. A FUELMEISTER II SYSTEM IS REQUIRED FOR OPERATION.
The eXpansion Tank module increases the capacity of your FuelMeister II platform with an additional 80 gallons of high quality washed biodiesel every single day. The eXpansion Tank (55 gal) accepts your
FuelMeister II Direct Catalyst Injection (Patent Pending) Lye Dissolver Lid and the Water Wash Lid. It comes with its own Transfer Lid used for moving fluids between tanks. It also comes with the required fill extension hose and drain hose. Multiple eXpansion Tanks can be added in different layouts to meet your space requirements.
Kit Includes:
§ eXpansion Tank and Stand
§ Transfer Lid with quick disconnect
§ 6′ fill extension hose with mating quick disconnect to the FuelMeister II
§ Pump input manifold
§ Tank bottom drain valve
§ Garden hose drain adapter
Using an Oil Transfer Kit is the easiest way to transfer cooking oil from pails, barrels and tubs into your 55 gallon oil collection barrel. Just connect the pump to a 12-volt car battery, insert the dip the drawtube into the oil vat and turn on the pump. It will transfer oil at about 5 gallons per minute and draws 10 amps of current.
Kit Includes:
§ 36 inch oil draw tube with screened foot valve
§ Draw tube anti-drip storage holster tube
§ 10 feet of clear flexible suction hose
§ 12VDC/10A pump with battery clips and switch
Kit Includes:
§ 12VDC/10A 5GPM diesel transfer pump
§ Fuel draw tube kit with screen filter pickup
§ 10 micron water-absorbing particulate filter and housing
§ Spare filter cartridge
§ Dispensing meter in gallons
§ 10 foot dispensing hose and nozzle
§ Hose support assembly
§ Barrel dolly on heavy duty casters
Oil Pre-Heater Kit 1KW, 120VAC heating element with thermostat control. It will accelerate your biodiesel production process by 2X-4X and improve your yields. It’s perfect for those cold garages or sheds.
